how to add a garden faucet

how to add a garden faucet

Best answer


Drill a hole at the point on the basement wall where you want the outdoor faucetto be located. The hole needs to be 1 inch in diameter so that the sillcock faucetcan go through. Push the sillcock faucetin the hole from the outside wall and screw it into the wall from both ends using galvanized screws.

People also ask


  • How do you turn a kitchen faucet into a garden hose?

  • Get a faucet adapter. This is a small adapter that screws onto the faucet and converts the end of the faucet into a male garden hose fitting. Unscrew the faucet tip.

  • How to install an outdoor kitchen faucet?

  • Secure pipe to the house framing with copper bell hangers. 5. Clean and flux all pipe ends and fittings, then solder the joints with a propane torch and lead-free solder. 6. From outside, wrap plumber’s putty around the flange on the outdoor faucet. 7. Insert the faucet into the 1鈪?inch-diameter hole and press it tightly to the house. 8.

  • How do you extend a kitchen faucet?

  • Install the coupler onto the male end of the water pipe and then install the extension into the coupler. Attach the faucet at the outer end of the extension. For longer extensions, drive a wooden stake in the ground as a support under the pipe near the faucet. Strap the pipe to the stake with metal plumber’s tape and deck screws.

  • How do you attach a faucet to a galvanized pipe?

  • Wrap vinyl plumber’s tape clockwise onto the threads at both ends of the galvanized pipe used for the extension. Thread one end of the pipe into the water pipe where the faucet was removed, says Thrifty Decor Chick.

    Leave a Reply

    Your email address will not be published. Required fields are marked *