how to coil a garden hose

how to coil a garden hose

Best answer


Coilinga HoseCoilinga hoseproperly will prolong its life 鈥?and it鈥檚 simple to do: Turn off the tap Take hold of the hosea few metres from the tap connector Bend a large loop, using about 1 metre of hose Moving 30 鈥?40cm further away from the tap, form another loop and stack it on top of the first loop

People also ask


  • How can I make a coiled garden hose?

  • This Old House recommends winding a hose around a round trashcan to create a neat stack of coiled hose. Lift the trashcan up when the coil is complete and secure the hose at two points on opposite sides of the coil with hook -and-loop tape. A small hose can be coiled inside a large garden pot; some are specially made for this purpose.

  • How do you store a coiled hose?

  • Lift the trashcan up when the coil is complete and secure the hose at two points on opposite sides of the coil with hook -and-loop tape. A small hose can be coiled inside a large garden pot; some are specially made for this purpose. Hoses are best stored flat once they are coiled, they should, however, be kept off the ground to avoid mildew.

  • Do coil garden hoses coil automatically?

  • This type of garden hoses coil automatically but some of them have a kinking and tangling problem. You cannot use coil water hose conveniently if the item has tangling and kinking trouble. Get this Flexon garden hose if you want to avoid those kinds of issues.

  • How do you bend a garden hose without breaking it?

  • Allow the hose to set in the sunlight for 5 to 10 minutes. Heat from the sun softens the rubber of the hose, making it easier to bend. Place the end of the hose that connects to the spigot on a flat area of the ground, and use it to make a loop about 2 1/2 to 3 feet in diameter.

    Leave a Reply

    Your email address will not be published.