how to connect garden hose to laundry tap

how to connect garden hose to laundry tap

People also ask


  • How do you connect a garden tap to a washing machine?

  • A garden tap connector allows a hose to be used to feed the washing machine. Once this is screwed on, just push fit the hose Use a knife or hose cutters to remove the bad section of hose and cut both ends square. A hose connector is used to join the two sections of hose. You just need to push each hose end into the connector.

  • Are washing machine connectors the same as garden hose tap connectors?

  • They use the identical thread and seals to garden hose tap connectors. I have a temprary need to connect up a washing machine inside the house with a long 6m run. This would require joinging several washing machine lines together with male-male 20mm connectors.

  • How do you connect a washing machine to a garden hose?

  • Washing machines in the UK have 3/4 inch water inlets. You can screw on a garden tap connector and then push fit the hose onto the connector. A garden tap connector allows a hose to be used to feed the washing machine. Once this is screwed on, just push fit the hose

  • How do I replace a garden hose with a tap?

  • Answer: The easiest solution is probably to cut off the garden hose thread (GHT) fitting on the end of your hose (or push fit adapter plus female fitting) and replace with a barbed female connector suitable for Chilean outside taps.

    Leave a Reply

    Your email address will not be published.