how to connect garden hose to laundry tap

how to connect garden hose to laundry tap

Best answer

Wrap plumber’s tape clockwise around the threads of the cold water interior water hookup for the washingmachine,or around the threads of the exterior water spigot. Tighten the female end,or coupler connection,of the garden hose onto the water hookup for the washing machine. Tighten a quarter turn more.

People also ask

  • How do you connect a garden tap to a washing machine?

  • A garden tap connector allows a hose to be used to feed the washing machine. Once this is screwed on, just push fit the hose Use a knife or hose cutters to remove the bad section of hose and cut both ends square. A hose connector is used to join the two sections of hose. You just need to push each hose end into the connector.

  • How do I attach a garden hose to a washing machine hose?

  • If you remove the washing machine hose from the wall, a standard Pope 12mm Universal Tap Adaptor should screw directly onto the exposed thread. This will allow a garden hose to click on.

  • Are washing machine connectors the same as garden hose tap connectors?

  • They use the identical thread and seals to garden hose tap connectors. I have a temprary need to connect up a washing machine inside the house with a long 6m run. This would require joinging several washing machine lines together with male-male 20mm connectors.

  • How do I replace a garden hose with a tap?

  • Answer: The easiest solution is probably to cut off the garden hose thread (GHT) fitting on the end of your hose (or push fit adapter plus female fitting) and replace with a barbed female connector suitable for Chilean outside taps.

    Leave a Reply

    Your email address will not be published. Required fields are marked *