how to empty garden hose

how to empty garden hose

Best answer


Depressthe remaining water from inside of your garden hose. This will prevent any leftover water inside the garden hose from freezing and damaging the lining. If you have a spray nozzle with a handle attached to your hose, depress the handle to spray out any remaining water from the inside of the hose.

People also ask


  • How do you get water out of a garden hose?

  • Drain the hose entirely of water. This procedure will help remove any water that has collected in the middle sections of your garden hose. Grab the end of the garden hose you recently disconnected from the spigot, keeping the mouth of the hose elevated to allow any remaining water to drain down the length of the hose.

  • How do you keep a garden hose from kinking?

  • Keep the string loose enough so it does not create a kink in the hose. Turn on the faucet to allow a full stream of water — rather than a trickle — to travel through the hose. Turn off the water 30 seconds or so after you notice water exiting the submerged end of the hose, indicating the hose is full.

  • How do I maintain the pressure in my garden hose?

  • 鈥?When you are not using the hose, turn off the water at the faucet. The hose should not be kept under pressure for long periods of time. 鈥?Keep the water pressure in the hose under 80 PSI. 鈥?Do not stretch-out the hose, unless it is filled with water. 鈥?When not in use and during cold or freezing weather, completely drain the hose.

  • What should I do if my hose is not in use?

  • 鈥?When you are not using the hose, turn off the water at the faucet. The hose should not be kept under pressure for long periods of time. 鈥?Keep the water pressure in the hose under 80 PSI. 鈥?Do not stretch-out the hose, unless it is filled with water.

    Leave a Reply

    Your email address will not be published.